1m² MaxProtect Floor Protection Mat 20 mm | 100x100 cm

Note: Corner and edge pieces are not included in the set price - please add individually if needed.

1m² MaxProtect Floor Protection Mat 20mm | 100x100cm

• Strong, safe, versatile—flooring for the highest demands.
• 100% odor-free natural rubber.
• Tested for harmful substances by Germany's top three institutes—verifiable with test reports.
• Layer 1: 2 mm fine-grain EPDM rubber for solid grip and a premium look.
• Layer 2: 13 mm to 23 mm coarse grain (depending on the version) for high shock absorption and noise reduction.

AirCushion with Additional Air Channels

• An enhanced version of the SolidProtect mat featuring MatConnect and AirChannel technology.
• The AirCushion system features rounded air channels that provide: extra shock absorption on drops, ventilation underneath the mat and noise reduction.
  

MatConnect: Unshakable Grip for Your Floor

• MatConnect: 16 interlocking points per mat ensure a matrix-style connection across the entire floor protection.
• Invisible from above, the fixing elements hold the tiles together.
• They prevent the mats from shifting, even when moving equipment across the training surface.
• The mat ends can be finished with corner pieces that sit flush with the edges of the mat.
• This creates a smooth transition between mat and floor, preventing the formation of raised edges.
• This reduces trip hazards and makes maneuvering weight benches or movable weight stands easier.
• The edge pieces are therefore not only a visually appealing solution but also enhance the safety and functionality of the flooring.

Step-by-Step Instructions for Cutting and Installing the Floor Protection Mats:

1. Safety first: Wear suitable work gloves to avoid cuts.
2. Choose the right tool: A sharp carpet or utility knife and a straight edge.
3. The surface should be flat and level. Additionally, use cardboard or similar material to protect the floor.
4. Measure precisely and mark the area to be cut with chalk, or lightly score it with the knife.
5. Place the straight edge and pull the knife firmly through the mat without lifting it. The cut should be made in one motion with even pressure. Repeat this process until the mat is completely cut through. Spread the mat apart piece by piece while cutting to reduce friction. If needed, moisten the blade with a little soapy water for smoother gliding. Note, however, that the risk of slipping also increases.
6. Any gaps between mats can simply be covered with black tape to prevent dust and dirt from getting in.

Article ID