R8 Bradley EXO | Add-on

R8 Bradley EXO | Add-On

• Modular EXO cable pulley system with 49 angle combinations for maximum training freedom
• Add-on for existing R8 Power Racks – expansion with no conversion work
• Available in three crossbar depths: 42 cm, 78 cm and 108 cm
• Choose from three cable pulley systems: 95 kg, 125 kg or Plate Loaded
• For 4-post racks in positions 1 to 3

Two EXO Arms. 49 angles. No limits.

• Horizontal adjustment: 180° across 7 positions, vertical adjustment: 90° across 7 positions
• 49 angle combinations per side in total
• Ideal for Cable Flys, rows, Lat Pulldown, Face Pulls, curls, triceps presses and Functional Training
• Turns a fixed cable anchor point into a freely adjustable cable cross system

The cable pulley follows your movement – not the other way round.

• 360° rotating cable outlet for a clean cable path in the direction of pull
• No jamming, no rubbing against the frame
• Even force transfer and a natural training feel across the entire cable travel

Three cable pulley systems. Your choice.

• 2×95 kg Weight Stack – long cable travel for especially expansive core exercises and wide ranges of movement, magnetic pin for lightning-fast weight changes
• 2×125 kg Weight Stack – heavy cable training despite the 2:1 ratio, likewise with a magnetic pin for progressive loading with no changeover break
• Plate Loaded – flexible loading with your own weight plates, no limit from a fixed weight stack
• Laterally integrated weight stacks for maximum freedom of movement and extra rack stability

Rock-solid on the rack. Freely movable when adjusting.

• The trolley runs play-free on the upright – no wobble, no rattle, no give
• Under training load the arm locks itself into the force vector
• Tool-free adjustment, UHMW plates protect the rack coating
• Designed for 75 × 75 mm uprights

2:1 ratio. Controlled. Joint-friendly.

• Even resistance, finer weight increments, clean technique even on heavy sets

The upgrade your gym deserves.

• Compatible with R8 attachments such as the step-up platform, hip thrust pad, Leg Blocker and Dip Station
• Simultaneous use of both cable sides possible with the optional dual pull bar
• On 78 cm and 108 cm racks, compatible with a retrofittable Smith Machine
• TÜV- and GS-certified to EN 20957 – suitable for commercial gyms

Which position is right for you?
The right choice comes down to two factors: your weight system and the crossbar depth of your rack.

Step 1 – How deep is your rack?
The crossbar depth determines which positions are available to you:

• 42 cm rack → position 1 only
• 78 cm rack → position 1 (front) or position 2 (rear)
• 108 cm rack → position 1 (front), position 2 (middle) or position 3 (rear)

Step 2 – Where does each position sit?
Read the other way round:

• Position 1 → 42 cm rack (the only position), 78 cm or 108 cm rack all the way at the front
• Position 2 → 78 cm rack at the rear or 108 cm rack in the middle
• Position 3 → 108 cm rack at the rear

Step 3 – Pick your cable pulley system, crossbar and position in the configurator.
You choose your combination and land on the right product automatically. The matching cable is supplied depending on position.

Got a 6-post rack with a rear add-on? Then the R8 Bradley EXO | Add-On | 6-Post (positions 4–6) is the right product for you.